6" 1000mm Length Stove Pipe With Cleaning Door
- 6" Premium Vitreous Enamel Stove Pipe
- Inspection/Cleaning Door
- 10 Year manufacturer Warranty
- Used for Burning Wood, Gas, Oil, Low Sulphur Coal, Pellets
- 1.2mm Thick
- Matt Black Enamel Coated
6" 1000mm Length Vitreous Stove Pipe With Cleaning Door
Single Wall straight length which can be easily combined to acheive the desired flue run.
Door makes inspection and cleaning of the flue system easier to access.
Always face the male end downwards when installing to ensure any moisture flows down the internal pipe.
|Designation:||EN 1856-1 T600 N1 D V2 L80100 G|
You should not install any piece of Vitreous with-in 3 x the internal diameter from combustible material eg: plaster board ceilings/wood etc, a 6" diameter piece of Vitreous should be 18" away from combustible materials ,
Each joint made should be sealed with Fire cement. Vitreous Flue pipe is only to be used as a connecting piece of flue between the appliance (EG: woodstove) and the flue liner or chimney stack.
Please make sure you buy the correct Adaptor to connect your Stove pipe to Flexible liner or Twin Wall Flue System.
|Recommended Fuels:||Wood, Gas, Oil, Low Sulphur Coal, Pellets|
|Building Regulations :||
We recommend that all installations are carried out by a qualified chimney installer.
additional information on installation and requirements can be found below.